August 15, 2016

From the 8th to the 12th of August the beautiful city of Lisbon was home of another successful Mould design/Product Development Workshop. 
 
Pedro Pontes, has conducted this 5 day training workshop. The participants learned the current common product / parison / mould...

July 7, 2016

Last week we’ve revealed our NEW EMPAKGLASS.COM

Today, we’re going to tell you about a new feature we’ve never before offered:

LIVE CHAT

We know that you don’t want to have to dig through a website to find the information you seek. You’re busy; we get that.

So we’re activ...

June 30, 2016

In Empakglass, we are constantly looking at innovative ways to enhance, grow and improve our customer’s experience.

We are proud to unveil our brand new Empakglass website which went live today, June 30th 2016! This has been an exciting journey since our first launch i...

June 4, 2016

"In EmpakGlass we believe knowledge only has value, if used and shared"

EmpakGlass is pleased to announce that our 2016 open training workshops are now available to all glass packaging professionals.

Where businesses do not have the number of co-workers to run a group in...

March 18, 2016

Empakglass conducted a training seminar on Mouldshop Operations & Maintenance in Parkcam, Turkey.

The training seminar was conducted between the 14th and the 18th of March and covered Bench, Convencional Lathe and CNC Lathe Machining.

The attendees were from the Mouldsho...

March 3, 2016

Empakglass conducted a training seminar on Product Development & Mould Design in Parkcam, Turkey.

The training seminar was divided into two parts, being the initial one performed between the 31st of August and 4th of September 2015 and the second part between the 2...

February 18, 2016

Empakglass conducted a training seminar on Cold End and Quality Control in Plovdiv, Bulgaria at Drujba Glassworks S.A. glass plant.

The training seminar was conducted between the 8th and the 18th of February to four different training groups in a total of 88 people.

The...

February 18, 2016

The training seminar was conducted between the 23rd January and the 18th of February 2016.

The attendees were from the Mouldshop team and the goal of the seminar was to upgrade LLG personnel in the scope of:

  • Theoretical and practical training on neckring repair:

      ...

January 6, 2016

Squeeze testing, also sometimes known as simulated impact testing is a destructive test that can be performed on glass containers during the manufacturing process.

This is a test usually implemented in line and therefore to which all produced containers can be submitted...

September 23, 2015

And then, there are those things that are not controversial (confused with this beginning? Please check my previous post).

Those things that everyone agrees upon. Those topics that generate a broad consensus.

In a glass container plant, one of those – rare… - subject’s,...

Please reload

Featured Posts