Empak Portugal and Empak Bulgaria perform combined training

Empak Portugal and Empak Bulgaria has recently finished another successful assignment, now in Saudi Arabia.

Using the holistic approach of Empak's Concept+ on Glass Container Production, we were challenged to provide a combined training on IS Production, Mould Design and Mouldshop maintenance.

During this training we had attendees ranging from:

• IS Production;

• Mould Design;

• Mouldshop;

Starting from glass conditioning and glass properties, IS timing and setting a proper gob delivery as the baseline for the mould design rules enabled all attendees to better understands the interactions, contraints and assumptions that both the Mould Design and the IS Departments need to face daily.

As part of our tradition in these trainings, we invite the attendees to bring real case scenarios to challenge Empak's PAKForming Simulator and this time was no exception.

As usual, staying in a classroom isn't enough and we are eager to get our hands dirty!

As part of the set of skills of our Concept+ Team we even supported a color change from Emerald Green to Amber!

Our deep thanks to the participants which provided a huge level of passion and interest onto the subjects, something that truly makes Product Development and Mould Design such an important aspect on the Supply Chain of Container Glass Industry.

And also for their great Hospitality and lunch periods which were an absolute delight!

We are looking forward to be challenged and continue to help finding solutions!

Would you like to know more?

If you need more detailed information on the fees, dates and target audience, contact Empakglass through: training@empakglass.com or management@empakglass.com

These are seminars developed by professionals to professionals, on the glass packaging industry and industries that also contact with glass as a packaging material.

Or in alternative,

Contact directly the local office of Empakglass in Bulgaria or our HQ in Portugal:

Phone: +359 893 914 876 (Bulgaria-Plovdiv)

Phone: +351 218 079 529 (Portugal-Lisbon)

e-mail: office@empaksolutions.com

Sincerely,

Hélder Remédios & Yordan Kamenov Management Team, Empakglass – Performance Solutions & Empak Bulgaria Ltd

Empak/Emhart Mould Design Training in Verallia Gazzo Veronese

Just before entering in "vacation mode", Empak and Emhart held another Product Development & Mould Design Training, this time in Verallia's plant located in Gazzo Veronese.

Concepts like glass properties, IS timing and even the impact of glass conditioning, gob temperature and delivery system in order to develop the building blocks for a successful mould design were widely discussed.

As part of our tradition in these trainings, we invite the attendees to bring real case scenarios to challenge Empak's PAKForming Simulator and this time was no exception.

Our deep thanks to the participants from Verallia which provided a huge level of passion and interest onto the subjects, something that truly makes Product Development and Mould Design such an important aspect on the Supply Chain of Container Glass Industry. And also for their great Hospitality!

Would you like to know more?

If you need more detailed information on the fees, dates and target audience, contact Empakglass through: training@empakglass.com or management@empakglass.com

These are seminars developed by professionals to professionals, on the glass packaging industry and industries that also contact with glass as a packaging material.

Or in alternative,

Contact directly the local office of Empakglass in Bulgaria or our HQ in Portugal:

Phone: +359 893 914 876

e-mail: office@empaksolutions.com

Sincerely,

Elisabete, Edgar, Hélder and Pedro (EMPAKGLASS Ltd)

Product Development & Mould Design BOOT CAMP

RUBIN GLASS, located in Pleven, Bulgaria, challenged Empakglass's team, in the context of its new GreenField Project and Plant extension, to prepare its newly set Mould Design Department, the base know-how to become proeficient and independent while developing glass containers but also the necessary mould equipment.

In a Boot Camp logic, the team from RUBIN GLASS was in Empakglass's HQ in Lisbon for three straight weeks, on which the know-how was built from the foundations, the basics in glass process up until subjects as diverse as "simulating" a conversation with a client proposing a bottle design and from there, using a CAD software, to develop the actual container, check the IS machine limits, most suitable production process, weight vs brimful capacity and finally extending from there up until the mould equipment drawings, the materials and parison development.

As a complement to the actual training, visits to Mould Equipment Facilities were made and also a Glass Production Facility, in order to provide an insightful vision of the actual process. Our deep thanks to NeckMolde, Metavil and Intermolde as well as Vidrexport, for letting us visit their production facilities.

Any greenfield project sucess's, as we know, depends directly on the set of skills, know-how and positive attittude from all the people involved, we wish RUBIN GLASS all the success and the trust in Empakglass for supporting them on this journey.

Would you like to know more?

If you need more detailed information on the fees, dates and target audience, contact Empakglass through: training@empakglass.com or management@empakglass.com

These are seminars developed by professionals to professionals, on the glass packaging industry and industries that also contact with glass as a packaging material.

Contact directly the local office of Empakglass in Bulgaria or our HQ in Portugal:

Phone: +359 898803090 (Bulgaria) or +351 218079529

e-mail: office@empaksolutions.com or management@empakglass.com

https://www.empakglass.com/

Sincerely,

Hélder Remédios & Yordan Kamenov Management Team, Empakglass – Performance Solutions & Empak Bulgaria Ltd

I